ZlideOn Triple Pack Zipper
ZlideOn is a replacement system for broken zip sliders. Now there’s no need to replace clothing or outdoor equipment simply because the zipper is no longer working.
Whether you’re out on a tramp or just trying to get the kids to school on time, ZlideOn has got you covered. You can count on ZlideOn to fix your zipper and make sure that you are ready and on your way.
It’s as easy as removing the old slider that won’t close anymore,click on yourZlideOn and you are ready to go. Made from high-quality steel and zinc. A zipper repair is as simple as easy as cut, open and click!
Instructions
- Step 1 First remove the old zipper-slider. This can be done in several ways. One way is to cut it in the middle with a wire cutter.
- Step 2 Ensure the ZlideOn is open. Open the ZlideOn holding the bottom part still and pull back the puller as far back as possible. Do not bend it open with a screwdriver or similar as this may prevent ZlideOn from working as it should.
- Step 3 Put the ZlideOn on to the zipper. If the zipper is closed somewhere, put it over the zipper where the zip teeth have meshed. If the zipper is fully undone, clip the ZlideOn to the starter box, then slide the insertion pin into the starter box.
- Step 4 Close the ZlideOn pressing the top and bottom part of the ZlideOn together with your fingers. Now your Zipper is repaired and you are ready to go!